Canon-imageRUNNER-2270 E020 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E020 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E020 0000 Error Code
E020 0000
Description :
The path between the sub hopper and the developing assembly is clogged with toner.
Causes :
The developing assembly toner sensor detects the absence of toner, while the sub hopper toner sensor detects the presence of toner.
With the developing clutch turned on, the hopper feed screw motor is rotated for 1 sec intermittently 194 times; still, the developing assembly toner sensor does not detect the presence of toner.
Solutions :
Replace the developing assembly toner sensor.
Replace the sub hopper toner sensor.
Replace the DC control PCB.
If you are looking at this post and have experience with this error message and wish to contribute you should leave a comment below. Or, if you have read this article and have further questions then ask. If I have experience with the trouble then I will answer back.
Bear in mind, not every error is entirely the same. What remedies the condition one occasion may possibly not solve it the next occasion. While the details in this write-up hails from the service manual and most often ought to get your machine operating, occasionally other causes may be in play.
