Xerox Phaser 3300MFP ADF Roller Replacement Procedure 130N01364, 130N01500
In this article, you will find the Xerox Phaser 3300MFP ADF Roller Replacement Process. As we move more and more towards scanning paperwork, I’ve detected and incline with the amount of pages being fed by way of document feeders. Many different makes establish unique maintenance values with the roller and separation pad. I’d think that whenever the roller is between 50,000 and 75,000 it in all probability ought to be swapped out in addition the separation pad rubber is rated somewhere between 25,000 and 50,000. Down the page, you will acquire the illustrated replacement assistance.
Xerox Phaser 3300MFP ADF Roller Replacement tips
Indication of worn out rollers are poor grab. The majority of people mention that they need to more or less force the pieces of paper along at first to get it started feeding in to the product and occasional jamming occurs repeatedly. Signs and symptoms of a worn out pad are numerous feeding or some like to call it, double feeding. If you find indicators of either of the aforementioned issues the best option is to change these items. Generally when your experiencing difficulty feeding, cleaning the rollers off a little bit ought to get it back doing the job once again for a short amount of time till you can get the equipment bought. Multiple feeding is generally more serious and is hard to get it operating successfully prior to the separation pad is exchanged.
Xerox Phaser 3300MFP Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)
Xerox Phaser 3300MFP ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Xerox Phaser 3300MFP ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Xerox Phaser 3300MFP ADF Roller Replacement and Separation Pad Replacement Parts
Xerox Phaser 3300MFP Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine) – $34.95 Genuine 130N01364 Doc Feeder (ADF) Pickup / Feed Roller Assembly for Xerox Phaser 3300MFP; Doc Feeder Part – Genuine Samsung Part; Xerox 130N01364 / 130N01500 |
 Xerox Phaser 3300MFP Doc Feeder Separation Pad Only (Genuine) – $6.95 Genuine 022N01487 Doc Feeder Separation Pad Only for Xerox Phaser 3300MFP; Doc Feeder Part – Genuine Samsung Part – Also Works in the MP Tray Assembly Only in the Samsung SCX6345N, Xerox WorkCentre 4150S |
