Samsung SCX-5530FN ADF Roller Replacement Procedure JC97-01962A, JC97-01962C, B2739530
On this page, there is the Samsung SCX-5530FN ADF Roller Replacement Technique. While we move more and more when it comes to scanning documents, I’ve observed and incline in the level of pages being fed with document feeders. Differing producers establish unique maintenance levels relating to the roller and separation pad. I’d say however, if the roller is between 50,000 and 75,000 it quite possibly should be swapped out and the separation pad rubber is rated somewhere between 25,000 and 50,000. Below, you will look at the illustrated replacement pointers.
Symptoms of worn rollers are ineffective pick up. Nearly all people complain that they must kind of boost the pieces of paper along to begin with to get it started feeding inside the unit and intermittent jamming will happen on a regular basis. Indications of a worn pad will be multiple feeding or some like to call it, double feeding. When you see indication of either of these situations your best bet is to remove and replace these sections. Most of the time if your having troubles feeding, washing the rollers off just slightly ought to get it back functioning yet again for a bit of time till you can get the components required. Multiple feeding is actually more annoying and is hard to get it working correctly before the separation pad is replaced.
Samsung SCX-5530FN Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)
Samsung SCX-5530FN ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Samsung SCX-5530FN ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Samsung SCX-5530FN ADF Roller Replacement and Separation Pad Replacement Parts
Samsung JC97-01962A Mea Unit-Pickup Dell
Features
- This is an O.E.M. Authorized part
- Fits with various Samsung brand models
- Oem part # JC97-01962A