Canon-imageRUNNER-3030 E743 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E743 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E743 0000 Error Code
E743 0000
Description :
There is an error in the DDI communication.
Causes :
An SCI error has occurred. The received data is faulty. A reception timeout condition has occurred. An SEQ timeout error has occurred.
Solutions :
Disconnect and then connect the flexible cable used to connect the reader unit and the printer unit.
Replace the following as necessary: flexible cable, reader controller PCB, main controller PCB.
If you’re looking at this short article and have knowledge of this malfunction and want to share you should leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will answer back.
Realize, not every error is precisely alike. What corrects the problem one occasion may possibly not solve it the next time. While the tips in this blog post is taken from the service manual and usually should get your device operating, at times other elements can be in play.
