Canon-imageRUNNER-3030 E730 A006 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E730 A006 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E730 A006 Error Code
E730 A006
Description :
There is a PDL software error.
Causes :
The PDL board does not respond.
A subbootable is faulty or absent.
Solutions :
1. Execute PDL resetting.
2. Turn on the power once again.
3. Check the connection of the SURF board.
4. Re-install the firmware.
5. Replace the main board.
If you’re looking at this short article and have knowledge about this error message and wish to contribute you should leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have knowledge about the situation then I will answer.
Realize, not every error is exactly alike. What remedies the problem one time might not exactly fix it the next time. While the specifics in this blog is obtained from the service manual and generally ought to get your piece of equipment operating, occasionally other things can be in play.
