Canon imageRUNNER 2545I E571 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E571 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E571 0001 Error Code
E571 0001
Description :
Causes :
The gripper unit does not leave the gripper unit home position when the Gripper Open/Close Motor (M7) has been driven for 0.25 seconds.
Solutions :
1.Replace the Grip Arm Sensor (S13).
2.Replace the Gripper Open/Close Motor (M7).
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is entirely the same. What treats the difficulty one occasion might not fix it the next time. While the information in this written piece hails from the service manual and usually should get your product up and running, sometimes additional variables may be in play.
If you are reading this write-up and have knowledge of this error and desire to share please be sure to leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will reply.
