Canon imageRUNNER 2545I E500 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E500 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E500 0000 Error Code
E500 0000
Description :
Causes :
The communication with the host machine is interrupted.
Solutions :
1.Check the cable.
2.Replace the Finisher Controller PCB (PCB1).
3.Replace the DC Controller PCB.
Note, not every error is precisely identical. What corrects the malfunction one occasion might not eliminate it the next time. While the information in this page is taken from the service manual and in most cases should get your piece of equipment functioning, from time to time other causes might be in play.
If you’re looking at this article and have exposure to this error message and wish to share you should leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will answer.
