Canon imageRUNNER 2545I E020 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E020 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E020 0000 Error Code
E020 0000
Description :
Causes :
The Developing Assembly Toner Sensor (TS1) detects the absence of toner,while the Sub Hopper Toner Sensor (TS2) detects the presence of toner With the Developing Cylinder Clutch (CL3) turned on, the hopper feedscrew motor (M7) is rotated for 1 sec intermittently 194 times; still, theDeveloping Assembly Toner Sensor (TS1) does not detect the presence of toner.
* Error occurs after the delivery if a paper in passage exists.
Solutions :
1.Check the rotation of hopper motor gear. (If rotating, false detection by the sensor is doubted. Feed the toner to the developing unit in service mode: CLEAR>ENGIN>TNRINST.)
2.Replace the Developing Assembly Toner Sensor (TS1).
3.Replace the Sub Hopper Toner Sensor (TS2).
4.Replace the DC Controller PCB (PCB4).
Note, not every error is totally identical. What treats the complication one occasion will possibly not remedy it the next occasion. While the help and advice in this short article obtain from the service manual and in most cases should get your machine operational, in some cases additional factors can be in play.
If you’re looking at this blog post and have exposure to this error message and wish to make a contribution please be sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will answer back.
