Canon imageRUNNER 2545I E540 0005 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E540 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E540 0005 Error Code
E540 0005
Description :
Causes :
The FG input cannot be detected when the Tray Lift Motor (M11) has been driven for 0.1 second.
Solutions :
1.Replace the Stack Tray Clock Sensor (S13).
2.Replace the Tray Lift Motor (M11).
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is exactly identical. What fixes the problem one time might not eliminate it the next occasion. While the guidance in this post is obtained from the service manual and in most cases should get your unit ready to go, occasionally other things might be in play.
If you’re looking at this article and have experience with this fault and would wish to make a contribution be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will respond.
