Canon imageRUNNER 2545I E520 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E520 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E520 0002 Error Code
E520 0002
Description :
Causes :
The shift roller does not return to the shift roller home position when the Shift Motor (M4) has been driven for 1.2 seconds.
Solutions :
1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is precisely alike. What fixes the situation one time might not exactly remedy it the next time. While the details in this text derives from the service manual and normally should get your machine functioning, from time to time other reasons can be in play.
If you’re looking at this article and have expertise in this problem and wish to make a contribution please leave a comment below. Or, if you have read this article and have more questions then ask. If I have exposure to the trouble then I will reply.
