Canon imageRUNNER 2545I E240 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E240 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E240 0001 Error Code
E240 0001
Description :
Causes :
The serial communication error such as parity error or overrun error is detected while printing.
Solutions :
1.Check the Connectors.
2.Replace the DC Controller PCB (PCB4).
Note, not every error is precisely the same. What treats the situation one occasion may possibly not take care of it the next occasion. While the tips in this piece of content comes from the service manual and in most cases should get your equipment functioning, occasionally additional variables can be in play.
If you’re looking at this article and have exposure to this fault and would wish to contribute please make sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will reply.
