Canon imageRUNNER 2545 E716 0010 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E716 0010 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E716 0010 Error Code
E716 0010
Description :
Causes :
When the communication with the 2-way unit is faulty after detecting the connection with the finisher.
Solutions :
1.Install the 2-way unit.
2.Check the cable.
3.Replace the DC Controller PCB (PCB4).
4.Replace the 2-way unit driver PCB.
Please remember, not every error is entirely alike. What corrects the problem one time will possibly not get rid of it the next time. While the data in this text is taken from the service manual and usually should get your unit operating, at times other reasons might be in play.
If you’re looking at this document and have exposure to this fault and would wish to share you should leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will respond.
