Canon imageRUNNER 2545 E540 0005 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E540 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E540 0005 Error Code
E540 0005
Description :
Causes :
The FG input cannot be detected when the Tray Lift Motor (M11) has been driven for 0.1 second.
Solutions :
1.Replace the Stack Tray Clock Sensor (S13).
2.Replace the Tray Lift Motor (M11).
3.Replace the Finisher Controller PCB (PCB1).
Please remember, not every error is exactly alike. What corrects the condition one time might not exactly remedy it the next time. While the specifics in this writing is taken from the service manual and oftentimes ought to get your equipment up and running, occasionally other variables may be in play.
If you’re looking at this page and have expertise in this error and wish to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will answer.
