Canon imageRUNNER 2535 E542 0005 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E542 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535 E542 0005 Error Code
E542 0005
Description :
Causes :
The FG input cannot be detected when the Additional Tray Lift Motor (M12) has been driven for 0.1 second.
Solutions :
1.Replace the Additional Tray Clock Sensor (S23).
2.Replace the Additional Tray Lift Motor (M12)
3.Replace the Finisher Controller PCB (PCB1).
Remember that, not every error is exactly alike. What corrects the condition one occasion might not fix it the next occasion. While the info in this post derives from the service manual and oftentimes should get your device operating, in some cases additional variables might be in play.
If you’re looking over this document and have exposure to this malfunction and desire to contribute make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will reply.
