Canon imageRUNNER 2030i E808 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E808 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E808 0000 Error Code
E808 0000
Description :
Fixing drive circuit failure
Causes :
The heater does not turn on.
Solutions :
A fixing drive motor failure was detected.
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the fixing drive motor.
Replace the DC controller PCB.
Replace the power supply PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2025i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Take into account, not every error is absolutely the same. What remedies the problem one time may possibly not fix it the next occasion. While the data in this article comes from the service manual and typically should get your product ready to go, in some cases other things could possibly be in play.
If you are reading this document and have experience with this error and want to share please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will answer back.
