Canon imageRUNNER 2030i E197 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E197 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E197 0000 Error Code
E197 0000
Description :
Printer engine communication error
Causes :
Erroneous communication between the DC controller PCB and image processor PCB was detected.
Solutions :
Check the connectors of the DC controller PCB and image processor PCB.
Replace the DC controller PCB for normal connection.
Replace the image processor PCB.
Take into account, not every error is entirely the same. What remedies the problem one time might not take care of it the next time. While the content in this posting is taken from the service manual and typically should get your machine operating, on occasion additional circumstances can be in play.
If you are reading this blog post and have expertise in this fault and wish to contribute make sure you leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will respond.
