Canon imageRUNNER 2030i E052 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E052 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E052 0000 Error Code
E052 0000
Description :
Erroneous connection to duplex unit
Causes :
Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication.
Solutions :
Check the connectors of the duplex unit and DC controller PCB.
Replace the duplex controller PCB.
Replace the DC controller PCB.
Take into account, not every error is exactly identical. What corrects the complication one time may not fix it the next occasion. While the details in this article originates from the service manual and most likely should get your unit functioning, in some cases other variables may be in play.
If you are reading this article and have knowledge of this malfunction and desire to make a contribution make sure you leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will reply.