Canon imageRUNNER 2030i E003 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E003 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E003 0001 Error Code
E003 0001
Description :
Abnormally low temperature (detected by sub thermistor)
Causes :
After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation.
Solutions :
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the DC controller PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2025i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Take into account, not every error is exactly the same. What fixes the condition one occasion will possibly not take care of it the next time. While the details in this document derives from the service manual and normally ought to get your product ready to go, from time to time other variables may be in play.
If you are reading this article and have knowledge about this error and desire to contribute be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will answer.
