Canon imageRUNNER 2030i E003 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E003 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E003 0000 Error Code
E003 0000
Description :
Abnormally low temperature (detected by main thermistor)
Causes :
After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
Solutions :
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the DC controller PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2025i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Take into account, not every error is exactly the same. What remedies the issue one time might not exactly take care of it the next time. While the ideas in this written piece is obtained from the service manual and in most cases should get your piece of equipment functioning, occasionally other elements could possibly be in play.
If you are reading this article and have information about this problem and wish to share you should leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have exposure to the situation then I will respond.
