Canon imageRUNNER 2030i E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E001 0001 Error Code
E001 0001
Description :
Abnormally high temperature (detected by sub thermistor)
Causes :
The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control.
Solutions :
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the DC controller PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2025i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Take into account, not every error is precisely alike. What corrects the problem one time will possibly not resolve it the next time. While the information in this blog post is inspired by the service manual and oftentimes ought to get your unit up and running, from time to time other things might be in play.
If you are reading this article and have information about this error and would wish to make a contribution please be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will answer.
