Canon imageRUNNER 2030i E000 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E000 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E000 0000 Error Code
E000 0000
Description :
Startup error
Causes :
The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
Solutions :
Check the fixing film connector.
Replace the fixing film unit.
Replace the DC controller PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2025i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Take into account, not every error is precisely alike. What treats the situation one time will possibly not remedy it the next time. While the data in this article is obtained from the service manual and usually ought to get your equipment up and running, occasionally other things may be in play.
If you are reading this article and have exposure to this problem and would wish to contribute be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will reply.
