Canon imageRUNNER 1750iF E805 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750iF E805 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 1750iF E805 0001 Error Code
E805 0001
Description :
Error in rotation of the Heat Exhaust Fan (Rear) (FM6)
Causes :
A lock signal could not be detected for 5 seconds while the Heat Exhaust Fan (Rear) (FM6) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J212) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Heat Exhaust Fan (Rear) (FM6).
3. Replace the DC Controller PCB (PCB1).
Make sure you remember, not every error is simply the same. What corrects the situation one time will possibly not eliminate it the next time. While the information in this document obtain from the service manual and generally ought to get your machine up and running, on occasion additional factors could possibly be in play.
If you are reading this post and have exposure to this problem and would like to make a contribution please leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the problem then I will respond.
