Canon imageRUNNER 1750iF E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750iF E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750iF E010 0001 Error Code
E010 0001
Description :
Main Motor (M2) rotation error
Causes :
Detection was performed every 100 msec since the start of drive and there had been no lock detection signal in 2 seconds.
Solutions :
1. Check the connector between the Main Motor and the DC Controller PCB (J203).
2. Replace the Main Motor (M2).
3. Replace the DC Controller PCB (PCB1).
Make sure you remember, not every error is absolutely identical. What fixes the problem one time might not exactly eliminate it the next occasion. While the material in this written piece comes from the service manual and most often should get your machine operational, from time to time additional factors could possibly be in play.
If you are reading this page and have experience with this fault and wish to share you should leave a comment down below. Or, if you have read this article and have more questions then ask. If I have experience with the trouble then I will respond.
