Canon imageRUNNER 1750iF E202 0000 Error Code

 

Canon imageRUNNER 1750iF E202 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750iF E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750iF E202 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 1750iF E202 0000 Error Code

E202 0000
Description :
CIS home position detection error

Causes :
1. Error when moving to the left side for HP check operation
2. Error when moving to the right side for HP check operation

Solutions :
1. Disconnect and then connect the Flexible Cable (Reader Controller PCB (PCB3) – Main Controller PCB (PCB2) 31pin).
2. Replace the Flexible Cable.
3. Replace the CIS HP Sensor (PS24).
4. Replace the Reader Motor (M10).
5. Replace the Reader Controller PCB (PCB3).
6. Replace the Main Controller PCB (PCB2).


Make sure you remember, not every error is entirely alike. What corrects the trouble one occasion will possibly not take care of it the next occasion. While the guidance in this page is obtained from the service manual and most often ought to get your machine operational, at times other elements can be in play.

If you are reading this page and have knowledge of this error message and want to contribute make sure you leave a comment below. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart