Canon imageRUNNER 1740iF E805 0003 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E805 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740iF E805 0003 Error Code
E805 0003
Description :
Error in rotation of the Heat Exhaust Fan (Front) (FM5)
Causes :
A lock signal was detected for 5 seconds while the Heat Exhaust Fan (Front) (FM5) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J212) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Heat Exhaust Fan (Front) (FM5).
3. Replace the DC Controller PCB (PCB1).
Just remember, not every error is exactly alike. What treats the malfunction one occasion might not exactly fix it the next occasion. While the information in this article is taken from the service manual and generally should get your machine functioning, now and again other things might be in play.
If you are looking over this short article and have exposure to this fault and desire to contribute please make sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will respond.
