Canon imageRUNNER 1740iF E202 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 1740iF E202 0000 Error Code
E202 0000
Description :
CIS home position detection error
Causes :
1. Error when moving to the left side for HP check operation
2. Error when moving to the right side for HP check operation
Solutions :
1. Disconnect and then connect the Flexible Cable (Reader Controller PCB (PCB3) – Main Controller PCB (PCB2) 31pin).
2. Replace the Flexible Cable.
3. Replace the CIS HP Sensor (PS24).
4. Replace the Reader Motor (M10).
5. Replace the Reader Controller PCB (PCB3).
6. Replace the Main Controller PCB (PCB2).
Don’t forget, not every error is totally alike. What fixes the malfunction one occasion may not remedy it the next time. While the tips in this written piece obtain from the service manual and usually ought to get your piece of equipment operational, from time to time other causes could possibly be in play.
If you are looking over this piece of content and have knowledge of this error and would like to contribute please make sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will respond.
