Canon imageRUNNER 1740iF E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740iF E110 0003 Error Code
E110 0003
Description :
Laser Scanner Motor error
Causes :
The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passed.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Don’t forget, not every error is simply alike. What fixes the complication one time might not exactly get rid of it the next time. While the specifics in this writing is obtained from the service manual and most likely ought to get your product operating, sometimes additional factors may be in play.
If you are looking over this piece of content and have information about this problem and would wish to share please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will answer back.
