Canon imageRUNNER 1740 E540 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E540 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E540 8001 Error Code
E540 8001
Description :
Stack Tray Shift Motor (M8) error
Causes :
The Stack Tray Shift Motor (M8) was driven for 4 seconds, but the Stack Tray shifting operation could not be completed.
Solutions :
1. Check the connector connection of the Stack Tray Paper Height Sensor (S9) or the Stack Tray Shift Motor (M8).
2. Check for open circuit of the Harness of the Stack Tray Paper Height Sensor (S9) or the Stack Tray Shift Motor (M8).
3. Replace the Stack Tray Paper Height Sensor (S9).
4. Replace the Stack Tray Shift Motor (M8).
5. Replace the Finisher Controller PCB.
Don’t forget, not every error is absolutely alike. What remedies the complication one time might not solve it the next time. While the data in this written piece is inspired by the service manual and most often ought to get your product up and running, now and again other elements may be in play.
If you are looking over this document and have exposure to this error message and desire to make a contribution please leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will answer back.
