Canon imageRUNNER 1740 E822 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E822 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E822 0001 Error Code
E822 0001
Description :
Error in rotation of the Delivery Cooling Fan (Front) (FM3)
Causes :
A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Front) (FM3) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Delivery Cooling Fan (Front) (FM3).
3. Replace the DC Controller PCB (PCB1).
Don’t forget, not every error is entirely alike. What remedies the malfunction one occasion will possibly not resolve it the next occasion. While the info in this posting originates from the service manual and normally should get your piece of equipment operating, occasionally other things may be in play.
If you are looking over this page and have exposure to this fault and would like to make a contribution please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will answer back.
