Canon imageRUNNER 1740 E110 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E110 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E110 0001 Error Code
E110 0001
Description :
Laser Scanner Motor error
Causes :
After startup of the Laser Scanner Motor, the speed lock signal of the Laser Scanner Motor never showed lock status although a specified period of time had passed.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is exactly the same. What corrects the problem one time may possibly not eliminate it the next time. While the material in this posting hails from the service manual and oftentimes ought to get your piece of equipment ready to go, now and again other elements can be in play.
If you are looking over this article and have exposure to this error message and desire to make a contribution please make sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer.
