Canon imageRUNNER 1730 E805 0003 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E805 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E805 0003 Error Code
E805 0003
Description :
Error in rotation of the Heat Exhaust Fan (Front) (FM5)
Causes :
A lock signal was detected for 5 seconds while the Heat Exhaust Fan (Front) (FM5) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J212) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Heat Exhaust Fan (Front) (FM5).
3. Replace the DC Controller PCB (PCB1).
Always remember, not every error is totally identical. What corrects the issue one time may possibly not eliminate it the next time. While the details in this post hails from the service manual and most likely ought to get your machine operating, occasionally other things can be in play.
If you are looking at this page and have expertise in this problem and would wish to contribute please make sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will respond.
