Canon-imageRUNNER-3530 E020 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E020 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E020 0000 Error Code
E020 0000
Description :
The path between the sub hopper and the developing assembly is clogged with toner.
Causes :
The developing assembly toner sensor detects the absence of toner, while the sub hopper toner sensor detects the presence of toner.
With the developing clutch turned on, the hopper feed screw motor is rotated for 1 sec intermittently 194 times; still, the developing assembly toner sensor does not detect the presence of toner.
Solutions :
Replace the developing assembly toner sensor.
Replace the sub hopper toner sensor.
Replace the DC control PCB.
Canon FK2-0358-000 Toner Sensor (Genuine) – $27.95
from: Precision Roller
If you’re reading this article and have information about this problem and desire to make a contribution make sure you leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have experience with the difficulty then I will answer back.
Take into account, not every error is entirely identical. What corrects the trouble one time might not exactly solve it the next time. While the guidance in this blog is obtained from the service manual and normally should get your device functioning, occasionally other factors could possibly be in play.
