Canon-imageRUNNER-3530 E064 0005 Error Code

 

Canon-imageRUNNER-3530 E064 0005 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3530 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3530 E064 0005 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3530 E064 0005 Error Code

E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)



Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.



If you’re reading this article and have knowledge of this malfunction and desire to contribute be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have experience with the situation then I will answer.

Take into account, not every error is exactly identical. What corrects the situation one time may possibly not solve it the next occasion. While the guidance in this written piece derives from the service manual and normally should get your unit up and running, in some cases additional variables might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart