Canon-imageRUNNER-3530 E007 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E007 0000 Error Code
E007 0000
Description :
The rotation of the fixing film is faulty.
Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3530 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3530 E000, E001, E002, E003, Error Code Reset
If you’re reading this article and have experience with this problem and want to contribute be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will respond.
Take into account, not every error is completely identical. What fixes the situation one time may possibly not remedy it the next time. While the help and advice in this document is inspired by the service manual and most likely ought to get your unit operating, in some cases other elements can be in play.
