Canon-imageRUNNER-3530 E002 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E002 0000 Error Code
E002 0000
Description :
The rise in temperature of the fixing assembly is faulty.
Causes :
While startup control is under way, the reading of the main thermistor is less than 115 deg C continuously for 400 msec 1.3 sec after it has indicated 100 deg C.
While startup control is under way, the reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3530 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3530 E000, E001, E002, E003, Error Code Reset
If you’re reading this article and have experience with this malfunction and wish to share be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have exposure to the issue then I will answer back.
Take into account, not every error is completely alike. What corrects the trouble one occasion might not exactly get rid of it the next time. While the advice in this posting is inspired by the service manual and most likely ought to get your unit ready to go, from time to time other factors might be in play.
