Canon-imageRUNNER-3530 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E001 0000 Error Code
E001 0000
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode:COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3530 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3530 E000, E001, E002, E003, Error Code Reset
If you’re reading this article and have experience with this error and would wish to make a contribution be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will reply.
Take into account, not every error is absolutely the same. What remedies the problem one time may possibly not fix it the next occasion. While the data in this article comes from the service manual and typically should get your product ready to go, in some cases other things could possibly be in play.
