Canon-imageRUNNER-3025 E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-3025 E261 0000 Error Code
E261 0000
Description :
The zero-cross signal is faulty.
Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.
Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.
If you are reading this piece of content and have experience with this error message and wish to make a contribution be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the trouble then I will answer back.
Make sure you remember, not every error is entirely identical. What remedies the issue one time might not exactly eliminate it the next occasion. While the info in this written piece originates from the service manual and most likely ought to get your product functioning, now and again other elements could possibly be in play.
