Canon-imageRUNNER-2870 E227 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E227 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E227 0002 Error Code
E227 0002
Description :
The reader unit power supply is faulty.
Causes :
At the start of a job, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness connector.
Replace the power supply.
If you are looking over this write-up and have expertise in this fault and would like to make a contribution please make sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will reply.
Just remember, not every error is simply alike. What corrects the complication one occasion may possibly not fix it the next occasion. While the advice in this document comes from the service manual and most often should get your product ready to go, sometimes additional circumstances may be in play.
