Canon-imageRUNNER-2870 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E110 0002 Error Code
E110 0002
Description :
The scanner motor is faulty.
Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 10 msec after the signal has indicated a locked state.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking over this short article and have knowledge of this error message and would wish to contribute please be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will respond.
Just remember, not every error is precisely identical. What treats the condition one time will possibly not eliminate it the next occasion. While the info in this page obtain from the service manual and in most cases ought to get your piece of equipment operational, occasionally other reasons could possibly be in play.
