Canon-imageRUNNER-2870 E001 0001 Error Code

 

Canon-imageRUNNER-2870 E001 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E001 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E001 0001 Error Code

E001 0001
Description :
The temperature of the fixing assembly is abnormally high.

Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.




Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the DC controller PCB.



Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95

Canon imageRUNNER 2870 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000


Canon imageRUNNER 2870 E000, E001, E002, E003, Error Code Reset

If you are looking over this post and have knowledge of this fault and would like to share please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will reply.

Just remember, not every error is entirely alike. What fixes the difficulty one occasion might not exactly fix it the next occasion. While the help and advice in this page is obtained from the service manual and most likely ought to get your equipment operational, occasionally additional variables might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart