Canon-imageRUNNER-2870 E225 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E225 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E225 0002 Error Code
E225 0002
Description :
The light intensity of the CIS is faulty.
Causes :
During DF stream reading, the sheet-to-sheet light intensity is faulty.
Solutions :
Disconnect and then connect the flexible cable.
Replace the following as necessary: flexible cable, CIS, reader controller PCB.
If you are looking over this write-up and have expertise in this error and desire to share be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will reply.
Just remember, not every error is precisely the same. What treats the difficulty one occasion may possibly not remedy it the next time. While the details in this document is obtained from the service manual and oftentimes should get your piece of equipment functioning, now and again other factors might be in play.
