Canon-imageRUNNER-2870 E064 0005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E064 0005 Error Code
E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are looking over this short article and have knowledge about this error and want to share please leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will answer.
Just remember, not every error is precisely alike. What corrects the issue one time might not exactly take care of it the next occasion. While the content in this blog post originates from the service manual and oftentimes ought to get your equipment up and running, in some cases additional factors might be in play.
