Canon-imageRUNNER-2870 E064 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E064 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E064 0003 Error Code
E064 0003
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are looking over this short article and have information about this malfunction and would like to contribute make sure you leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the difficulty then I will answer back.
Just remember, not every error is exactly the same. What remedies the issue one occasion might not solve it the next occasion. While the help and advice in this blog is obtained from the service manual and in most cases should get your device functioning, now and again other things could possibly be in play.
