Canon-imageRUNNER-2870 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E001 0002 Error Code
E001 0002
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2870 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2870 E000, E001, E002, E003, Error Code Reset
If you are looking over this post and have knowledge of this problem and desire to contribute please make sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have experience with the problem then I will respond.
Just remember, not every error is entirely alike. What remedies the complication one occasion might not remedy it the next occasion. While the data in this short article obtain from the service manual and in most cases ought to get your piece of equipment functioning, from time to time additional variables can be in play.
