Canon-imageRUNNER-2870 E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E010 0001 Error Code
E010 0001
Description :
The rotation of the main motor is faulty.
Causes :
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are looking over this short article and have experience with this fault and wish to share be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have information about the problem then I will answer.
Just remember, not every error is entirely identical. What remedies the situation one occasion might not eliminate it the next time. While the tips in this blog comes from the service manual and most likely should get your device working, now and again other things can be in play.
