Canon-imageRUNNER-2270 E730 9005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E730 9005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E730 9005 Error Code
E730 9005
Description :
There is a PDL software error.
Causes :
There is a fault in the connector of the vide cable to the external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you are looking over this article and have experience with this error and desire to contribute make sure you leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will reply.
Do not forget, not every error is entirely alike. What treats the complication one occasion may possibly not solve it the next time. While the tips in this blog post derives from the service manual and in most cases should get your product working, on occasion other elements may be in play.
