Canon-imageRUNNER-2270 E730 A006 Error Code

 

Canon-imageRUNNER-2270 E730 A006 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2270 E730 A006 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2270 E730 A006 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2270 E730 A006 Error Code

E730 A006
Description :
There is a PDL software error.

Causes :
The PDL board does not respond.
A subbootable is faulty or absent.



Solutions :
1. Execute PDL resetting.
2. Turn on the power once again.
3. Check the connection of the SURF board.
4. Re-install the firmware.
5. Replace the main board.


If you are looking over this article and have experience with this error and wish to make a contribution please be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will answer back.

Do not forget, not every error is entirely identical. What remedies the trouble one occasion will possibly not resolve it the next time. While the data in this page is obtained from the service manual and typically should get your machine functioning, occasionally additional factors could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart