Canon-imageRUNNER-2230 E609 E610 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E609 E610 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E609 E610 Error Code
E609 E610
Description :
The HDD coding key is faulty.
Causes :
The SRM/PCB is faulty.
The battery has become exhausted,leading to loss of SRAM contents.
Solutions :
Try step 1); if it fails, try step 2).
1) Turn off and then back on the power switch to generate the key once again.
2) If the same error still continues, replace the board on which the SRAM is mounted.
(Keep in mind that doing so will lead to loss of all user data.)
If you are looking at this document and have knowledge about this error and desire to make a contribution please be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have information about the difficulty then I will respond.
Always remember, not every error is simply alike. What remedies the situation one time might not resolve it the next occasion. While the data in this document is obtained from the service manual and generally ought to get your product up and running, from time to time other reasons can be in play.
