Canon-imageRUNNER-2230 E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E261 0000 Error Code
E261 0000
Description :
The zero-cross signal is faulty.
Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.
Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.
If you are looking at this document and have expertise in this fault and wish to share be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer.
Always remember, not every error is exactly the same. What treats the complication one time might not get rid of it the next occasion. While the content in this document comes from the service manual and in most cases ought to get your piece of equipment working, at times other elements can be in play.
