Canon-imageRUNNER-2230 E003 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E003 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E003 0000 Error Code
E003 0000
Description :
The fixing temperature is too low after a standby state.
Causes :
While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2230 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2230 E000, E001, E002, E003, Error Code Reset
If you are looking at this article and have expertise in this error message and wish to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the trouble then I will reply.
Always remember, not every error is absolutely identical. What fixes the issue one occasion may possibly not solve it the next time. While the guidance in this blog post is taken from the service manual and normally ought to get your machine working, at times other factors may be in play.
